Safeguard

Consystex's unique Safeguard modular edge protection system has experienced world-wide success in the construction industry since 2008. Find out why leading construction projects are choosing Safeguard.

Safeguard's quick release system allows you to adjust protection height in minutes.

Safeguard is a modular edge protection system that has had great success in the worldwide building industry since 2008.

A quick-release system attaches the components easily to each other at speed and, utilising the same components, you can quickly and easily increase or decrease your protected height by simply adding to the basic 1.2m high components - enabling you to increase protection zone height to 1.8m or to full height from floor to ceiling.

The product is available to purchase or rent and we also have professional installation crews if required.

Contact Consystex today to speak to a Safeguard expert.

ALL PRODUCTS HAVE BEEN TESTED TO AND PASS AS/NZS 4994.1:2009

Safeguard's modular edge protection systems includes a range of components that you can quickly and easily increase or decrease your protected height from 1.2M to full height floor to slab.

1.2M High

A quick-release system attaches the components easily to each other at speed Constructed using just 4 components. Standard Post, Panel and Link Bars. The post has two rear facing fixing brackets to house the adjustable link bars (EG04), there ready to provide a safe edge in the event that the panel is removed. The 2.6m Base Panel (EG03) is fixed to the front of the post by simply hooking over the panel and locking it into place with 1 quick release latch on each post

1.8M High 

Constructed using just 4 components. Standard Post, Panel and Link Bars. The post has two rear facing fixing brackets to house the adjustable link bars (EG04), there ready to provide a safe edge in the event that the panel is removed. The 2.6m Base Panel (EG03) is fixed to the front of the post by simply hooking over the panel and locking it into place with 1 quick release latch on each post

1.8M Exclusion Zone

Constructed using just 4 components. Standard Post, Panel and Link Bars. The post has two rear facing fixing brackets to house the adjustable link bars (EG04), there ready to provide a safe edge in the event that the panel is removed. The 2.6m Base Panel (EG03) is fixed to the front of the post by simply hooking over the panel and locking it into place with 1 quick release latch on each post

Full Height, Floor to Slab

Again the full height is an extension of the 1.2m configuration. Add one full height adaptor post (EG05) and a telescopic panel (EG06). There is an additional hook for the panels to connected to at the top of the post. This will allow you to drop the panel for services clearance or to work at the leading edge. A one piece full height friction post (EG16) can replace the two posts

Australia
1300 266 797
International Direct Line
+61 499 977 607